The Double Under Counter Water Filter Housing is an under sink housing unit designed to hold two standard 10" x 2.5" water filter cartridges.
This double under counter housing comes with the components needed to connect to a standard faucet/sink setup. Plumbing experience is suggested for installation.
Made in the USA by QMP.
Product Details
- Double under counter water filter housing unit
- Fits 2 standard 10" x 2.5" water filter cartridges
- Designed for under sink installation
- Connects to a standard faucet/sink setup
- Plumbing experience suggested for installation
- Made in the USA by QMP
Important Notes
- Filter cartridges are sold separately unless otherwise specified.
- Install only where the system is protected from freezing.
- Do not install where leaks or system failure could cause damage.
- A working pressure regulator should be installed and in proper working order before installation.
- Do not subject the housing to more than 75 PSI.
- Contact a licensed plumber if you cannot verify pressure regulation or complete installation safely.
Installation Overview
The provided installation instructions include steps for connecting the water supply, installing the needle valve and hex feed adapter, positioning the filtration system under the sink, connecting the red feed line to the water supply, connecting the blue line to the faucet, checking connections, flushing the system, and checking for leaks during the first 24 hours of operation.
The included faucet installation instructions cover use of an existing spray hose hole or drilling a new sink hole, installing faucet washers and hardware, connecting 1/4" plastic tubing, tightening the compression nut, and checking for leaks and proper operation.
Warranty
1 year limited warranty.
View Installation Instructions here.
